1-4X24 30mm Long Eye Relief CQB Scope w/ Glass Circle Dot RGB Reticle & QD Rings
Detail Information:
• Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof
• 30mm Tube with Emerald Coated Lens for Crystal Clear View with Maximum Light Transmission
• Premium Zero Lockable and Zero Resettable Target Turrets with Most Consistent and Precise 1/2 MOA Per Click Adjustment
• Etched Glass Circle Dot Reticle for Both Quick CQB Field Action and Precision Aiming
• Clear and Sharp Black Reticle Without Battery Power
• Red/Green Dual Illumination for Most Versatile Applications and Weather/Light Conditions
• Large Field of View (Wide Angle) and Most Accommodating Eye Relief for Optimum Critical CQB Mission
• Complete with Built-in Sunshade, High Quality Flip-open Lens Caps and Quick-detachable Picatinny/Weaver Rings
Magnification: 1X - 4X
Tube Diameter: 30mm
Objective Diameter: 24mm
Field of View @ 100 yards: 108' - 27.5'
Eye Relief: 4.5" - 3.2"
Exit Pupil: 17.8mm - 6mm
Click Value @100 yards: 1/2"
Length: 248mm
Weight: 16.9 oz
Parallax Setting: 100 Yds - Infinity
Batteries: CR2032 3V
A: 237mm
B: 118mm
C: 43mm
D: 40mm
E: 91mm
F: 28mm
G: 41.2mm
H: 34.6mm
I: 10mm
Target Dot reticle consists of a single floating dot in the center as the aiming point with the least visual distraction. It is commonly used for quick aiming applications with lower demand for pin-point accuracy. The shooter aims by pointing the dot on the target. Target Dot may be permanently etched on glass or formed by light reflection. For an etched dot, you can use the dot for aiming with or without illumination and the scope may come with variable magnifications. The dot size can be controlled to as small as 2MOA with sharp and clear edges. For a reflex dot, the sight usually does not have magnification and there is an unlimited eye relief. The reflex dot is a reflected image of the light source with common characteristics from any light reflection, including possibly slight flare and fuzziness of the dot. The typical dot size is 5MOA.
Circle Dot reticle includes a floating circle and a dot in the center. The circle draws the eye to the target and the dot indicates the exact aiming point. Circle Dot reticle is ideal for shotgun shooting, fly hunting as well as tactical applications which require quick target acquisition. The circle may be broken into four quadrants for convenient alignment. Circle Dot may be permanently etched on glass or formed by light reflection. For an etched circle dot, you can use the reticle for aiming with or without illumination and the scope may come with variable magnifications. The dot size can be controlled to as small as 2MOA with sharp and clear edges. For a reflex Circle Dot, the sight usually does not have magnification and there is an unlimited eye relief. The reflex Circle Dot is a reflected image of the light source with common characteristics from any light reflection, including possibly slight flare and fuzziness of the dot. The typical center dot size is 5MOA.
Duplex reticle consists of thin crosshairs in the center and four posts extending to the reticle perimeter from the edges of the thin crosshairs. The thicker posts stand out against the background, while the thin crosshairs are for precise aiming and better view of the area of interest on the target. The thin crosshairs may also be used for range estimating. Duplex reticle could be etched on glass or etched from metal thin film. It may also be illuminated. Comparing to Mil-dot reticle, Duplex reticle is more traditional and usually used in hunting applications.
Pro 5-step reticle is designed for crossbows, but can also be used in other applications such as rifles, airguns, etc. The reticle consists of five horizontal lines and a vertical line. And there is a thin crosshair in the center. If used on crossbows, the horizontal lines are for aiming at 10, 20, 30, 40 and 50-yard distances. The lines are calibrated for 300fps crossbows. The user needs to find out the exact yardage of each line during zeroing process. Pro 5-step reticle could be etched on glass or etched from metal thin film. It may also be illuminated.
Optics Warranty:
Lifetime warranty* for AccuShot Series, 5th Gen Series and Golden Image Series scopes.
(*2 year warranty for Red/Green Dot Scopes/Sights.)
Warranty against material or workmanship defects applies based on the following conditions -
Scope was a first-hand purchase. Evidence of purchase is required for warranty service. Warranty is not transferrable.
Scope was not disassembled, parts/screws not removed or loosened, and the scope was not tampered with in any way. Any evidence of such interference will void the warranty.
Scope has not been abused, maliciously damaged or treated in a manner not in keeping with the purpose it was designed for.
Click Customer Service, e-mail office@leapers.com, or call (734)542-1500 to request warranty service and obtain Leapers Return Authorization Number(RA#) before returning the product. Provide the following information when contacting us:
Scope model, serial number, invoice showing seller and date of purchase, reason for return, shipping address (no P.O. Box).
Send the product in its original packaging and the above information with RA# to Leapers. A minimal processing fee will be required. The warranty request will be processed within 1 week upon receipt.
TS Platform
True strength scope platform using smart spherical structure(SSS) to achieve simplified and strengthened inner/outer tube interaction for most precise and responsive W/E adjustment and toughest recoil resistance.
--------------------------------------------------------------------------------
Long Eye Relief Scope
Scopes with extended eye relief(Distance between scope eye piece and user's eye) for more comfortable use and flexible mounting of scope in various applications.
--------------------------------------------------------------------------------
Regular Illumination
Adjustable illumination knob on the Ocular tube for red, green or black reticle, different levels of brightness for diverse weather/light conditions.
--------------------------------------------------------------------------------
Ring-lock Target Turrets
Windage/elevation target turrets with locking ring to lock zero and zero-resetting function to align marking after zeroing your scope.
--------------------------------------------------------------------------------
Variable Power
Magnification of the scope is adjustable.
--------------------------------------------------------------------------------
Mounting Accessories Included
--------------------------------------------------------------------------------
Integral Sunshade
Angled objective providing a built-in, integral sunshade.
--------------------------------------------------------------------------------
Lever Lock [Patent Pending]
Lever Lock [Patent pending]
1-4X24 30mm Long Eye Relief CQB Scope w/ Glass Mil-dot RGB Reticle & QD Rings
