GL-SHOCK
SHOCK ABSORBING BUTT STOCK
The GL-SHOCK will work on any weapon with an M4 style collapsible butt stock tube!
The GL-Shock, manufactured by FAB Defense in Israel, effectively reduces felt recoil and muzzle rise for better control when firing. The GL-Shock is also the perfect solution for AR-15s and AR-10s chambered in harder recoiling calibers, such as the 6.8 SPC, .308 Winchester, .450 Bushmaster, or .50 Beowulf. The Mako Group offers collapsible stock kits for the AK-47/74 and SA vz.58-style rifles and for Remington and Mossberg shotguns that can be combined with the GL-Shock to provide recoil reduction for these weapons.
The GL-Shock’s unique patented design allows it to be mounted on any standard MIL-SPEC or commercial carbine receiver extension (buffer tube). It is a drop-in replacement for the standard M4-style stock. The GL-Shock auto-adjusts to fit both commercial and MIL-SPEC buffer tubes with a tight, rattle-free fit. Unlike other recoil management systems for AR-15 carbines, the GL-Shock does not use expensive non-standard buffers or buffer springs which often affect the function of the weapon. With the GL-Shock, all factory buffer parts are retained, since recoil-reduction takes place in the stock itself.
The GL-Shock’s design is based on The Mako Group’s very successful GLR16 buttstock, a high-end M4/AR-15 stock with a two-battery storage compartment and a rubber buttpad. The tire tread-inspired, integrated rubber buttpad grips body armor or tactical vests, improving weapon control. The GL-Shock features slots for three sling attachment locations, as well as quick-detach sling swivel mounts on both the left and right sides of the stock.
Pushing a button allows the GL-Shock’s rubber buttpad to slide down, exposing a gasket-sealed waterproof battery compartment. The GL-Shock’s enlarged storage compartment fits a wider array of batteries and spare parts, such as extra firing pins, gas rings, springs, or extractors.
This model comes with a fully-adjustable cheek riser is available for the GL-Shock (GL-ShockCP). It provides the proper eye height for carry handle-mounted optics on M4/AR-15 carbines. The GL-ShockCP is ideal for the optic-equipped AK-47, vz.58, or any shotgun that has a low stock height designed for iron sight use.
GL-Shock w/Adjustable Cheek Piece $94.99
Storage compartment for CR123 batteries.
Side Picatinny rail - allows addition of Adjustable cheek-rest (#ACP), mag' pouch (#MA16) or shell holder (#SSM).
Rubber non-slip buttpad with tapered angle, allows faster shouldering & increased comfort with body armor.
Two ultrasonically welded metal quick release sling mount points.
All can be easily fit to both left/right handed users.
Available for mill standard tube too (#CBSM).
No gunsmith required • Mill-standard • Warranty: 10 years
The result of years of research & development. This sniper stock is ideally suited to meet the demands of the precision marksman community. Proven to provide rapid target acquisition, faster & more accurate follow up shots, & quicker target-to-target attainment. Completely adjustable, featuring a rear-folding leg that converts a rifle with a bipod into a stable shooting platform.
10 positions push button adjustable length of pull of stock.
New push button controlled fully adjustable cheek rest for height & eye relief with optics.
Vertically adjustable rubber butt pad.
Quick release push button leg extension with fine height adjustment button & micro adjustment ring.
Available without the pod-leg (#ARSNL).
Push Button leg locks in 3 positions: 0˚, 45˚, 90˚.
2 quick release sling mount points.
No gunsmith required • Mill-standard • Warranty: 10 years
Collapsible combat stock with advanced features to fit both MIL-SPEC and commercial receiver extensions.
Standard issue stock for Israeli Defense Forces.
6 attachment points for single point, 2-point, and 3-point slings.
Rubber buttpad.
Storage compartment for two CR123A 3V lithium batteries or two AA batteries.
Holds either type of battery without allowing rattle.
MIL-SPEC reinforced polymer composite, steel hardware, rubber buttpad.
This is the stock chosen by SIG Sauer® for use on the SIG 556 rifle.

Clean, intuitive, sniper stock designed for use on the Israeli military’s SR25 Sniper rifles.
Also for M110 sniper rifles, Mk12, M16/AR-15, many .50 BMG rifles, and any other rifle that uses an M16 style stock.
Ultimate sniper, varmint, and benchrest stock for the AR-15 or AR-10 platform.
Adjustable cheekpiece with 8 height positions.
Quick release adjustable monopod deploys instantly to desired height with touch of a button.
Fine and extra-fine elevation adjustment, up to 6.5” of height.
MIL-SPEC reinforced polymer composite, steel hardware, rubber buttpad.
Push-button operation.
AK47 Sharp Shooting Stock $499.99, No Leg $299.99
Advanced Sniper Stock (SRS) $387.99
10 positions push button adjustable length of pull of stock.
New push button controlled fully adjustable cheek rest for height & eye relief with optics.
Vertically adjustable rubber butt pad.
Quick release push button leg extension with fine height adjustment button & micro adjustment ring.
Available without the pod-leg.
Push Button leg locks in 3 positions: 0˚, 45˚, 90˚.
2 quick release sling mount points.
No gunsmith required • Mill-standard • Warranty: 10 years
Specifically engineered for the Designated Marksman. The MARS/SARS stock allows the user to provide enhanced, rapid, accurate fire. Shorter length specifically designed for collapsible tubes. Available for milled and stamped receivers.
Collapsible Butt Stock $65.99
SSR25 Sniper Stock $199.95
GLR-16 M4/AR-15 Stock $77.95
GL-Shock w/Adjustable Cheek Piece $94.99